Journal #48

Why Gotland Still Matters

Twenty-seven years after J Craft began on Gotland, the lives of the people who build our boats still guide what we make and how we make it.

Published November 22, 2026

Words by: J Craft

A hand works sandpaper over mahogany in the Visby yard, preparing the surface for another coat of finish. A visitor might admire the patience, the feel for the material and the beauty taking shape, without thinking to ask what that hand was doing before it ever touched a Torpedo.

The hand from our opening line: a sanding block worked across mahogany at the Visby bench, ready for another coat.
The hand from our opening line: a sanding block worked across mahogany at the Visby bench, ready for another coat.

The answer might involve a cod boat, a naval diving assignment or a sailing race. It might begin in a furniture workshop. Twenty-seven years after J Craft began on Gotland, those experiences still come to work with the people who build our boats, guiding their decisions about what to make and how to make it.

Johan Hallén runs a palm over the varnished mahogany deck, his reflection held in the finish between the pale seams.
Johan Hallén runs a palm over the varnished mahogany deck, his reflection held in the finish between the pale seams.

Beautiful, functional, and above all capable.

Fine shipyards and skilled boatbuilders have earned their reputations in many parts of the world, but fewer yards belong to an island where making boats and relying on them have gone hand in hand for centuries. Our tradition of fine boatbuilding is rooted in Gotland, an island that was once a stronghold of the eastern Swedish Vikings, the Rus, whose trading routes reached across the Baltic and as far as Constantinople and Baghdad. By the thirteenth century, Visby had become a centre of the Hanseatic League, its prosperity bound to ships and the people who knew how to build and use them. The sea connected our home island to the wider world, and a boat had to earn her place in that life. That sailing and boatbuilding knowledge, accumulated over more than a thousand years, lives on in the spirit of our work and, at times, in the practical decisions we make when building a Torpedo.

The hands making a Torpedo have been shaped by lives spent using boats as well as building them. The islander, the fisherman, the sportsman, the person who has served in the navy or army, the craftsman and the boat builder are different sides of the same person. Their experience does not stay behind at the workshop door. It remains active in the choice of a material, the arrangement of equipment and the judgement of what a particular owner's boat needs to do.

Teak flooring is prepared in the yard too: a panel checked at the bench, freshly varnished mahogany parts waiting in front.
Teak flooring is prepared in the yard too: a panel checked at the bench, freshly varnished mahogany parts waiting in front.
Five pairs of hands and one curved mahogany section, wheeled across the gravel outside the Visby yard.
Five pairs of hands and one curved mahogany section, wheeled across the gravel outside the Visby yard.

You can hire a carpenter. You cannot hire a lifetime on an island.

Six lives, one instinct

An islander learns to think of a boat as a means of getting somewhere, not simply somewhere pleasant to sit. A fisherman takes that understanding further, because the boat is a working tool and getting home is part of the job. Between them, they bring two questions to a Torpedo: will she do what is needed, and what is the alternative if something goes wrong?

The sportsman has felt what happens when a boat is pushed, when strength and handling cease to be entries on a specification and become matters of immediate interest. The serviceman, whether in the navy or army, has used equipment with a purpose, under pressure, and brings a discipline that asks how something will behave when conditions are less accommodating than the workshop.

The craftsman wants beauty to be useful, so the question is not only whether a piece of joinery looks right but whether it belongs in a moving boat. The boat builder must bring all these judgements together, from the structure beneath the wood to the equipment the owner will use, without allowing one attractive detail to weaken the whole.

These are not six job titles we expect to find on a business card. They are six ways of looking at the same decision, and the design principle they suggest is deliberately demanding: different lives, one lesson. Assume it can fail, and give it a back-up.

That is an instruction to think beyond the first solution, rather than a claim that every component aboard has a duplicate. Capability begins by taking the possibility of failure seriously.

One of the first Torpedo drawings, in four views: profile, longitudinal section, and exterior and interior plans.
One of the first Torpedo drawings, in four views: profile, longitudinal section, and exterior and interior plans.

Two men, one island

Johan Hallén, J Craft's master builder, was born in Stockholm to Gotland parents and moved to Visby at two and a half. By sixteen he was renovating a six-metre wooden fishing boat, which he used to fish cod along the coast as his summer job for several years. The fisherman and the craftsman began together, with a boat whose usefulness he had to judge at sea.

The navy added another kind of responsibility. Johan served as a mine diver, then as a second lieutenant at his home regiment in Fårösund, where his work as a training officer included navigation. When the regiment closed, he could have taken a post on the mainland. He chose to stay on Gotland.

His working life also included training as an interior carpenter, running his own carpentry business and working in boat development in Visby. Alongside it all came six years in a hand-picked Gotland racing crew, invited to represent Sweden at the 40-foot world cup in Kiel. Fishing, service, craft and competition gave him different occasions on which a boat, or the work put into one, had to answer for itself.

In August 1999 he joined J Craft's founder, Björn Janson, and helped build the first J Craft, the Cabrio Cruiser Polaris, for Sweden's King Carl XVI Gustaf. He has built every J Craft since. Johan has now spent 27 years with J Craft. The islander's decision to stay has a consequence for an owner visiting today: the man who helped make the first boat is still there to discuss the next.

Johan Hallén, who joined J Craft in August 1999, seated among racks of veneer in the workshop's early days.
Johan Hallén, who joined J Craft in August 1999, seated among racks of veneer in the workshop's early days.
Björn Janson, J Craft's founder, on the phone in the workshop, the unpolished windscreen frame of Polaris before him.
Björn Janson, J Craft's founder, on the phone in the workshop, the unpolished windscreen frame of Polaris before him.

Zoltan Antunovic, J Craft's assembly manager, arrived at the same work by a different route. Born in Visby in 1975 to a Gotland mother and a Hungarian father, he completed a three-year machine carpentry programme at Säve gymnasium in 1994, specialising in furniture carpentry. Military service followed in 1994 to 1995, on Gotland, as a machine gunner in an armoured tank unit.

He fishes, and he raced in the same Gotland sailing crew as Johan. His training gave him the furniture maker's understanding of material and fit, while life afloat supplied a rather different setting in which to judge the result. A drawing room usually has the courtesy to stay still.

Zoltan Antunovic on a sea trial, the instrument dials set in varnished mahogany.
Zoltan Antunovic on a sea trial, the instrument dials set in varnished mahogany.

Before J Craft, Zoltan worked on plugs and moulds, fibreglass lamination, assembly and new product development. Around 30 years in boatbuilding have taken him through the making of the shape, the structure and the finished boat, and as J Craft's assembly manager he has worked on every Torpedo built. When separate trades meet in one boat, he understands the work on both sides of the join.

Björn Janson with the early team around a deck section in the yard's first years, a wooden wheel already in place.
Björn Janson with the early team around a deck section in the yard's first years, a wooden wheel already in place.
A young Zoltan Antunovic mid-gesture in the hall, a varnished deck and polished windscreen frame behind him.
A young Zoltan Antunovic mid-gesture in the hall, a varnished deck and polished windscreen frame behind him.

What the sea asks

Björn Janson's founding vision for J Craft joined the elegance of a classic wooden runabout to a GRP hull robust enough for Baltic conditions. Appearance and capability belonged in the same brief from the beginning, as they must for people whose experience of boats includes earning a catch, navigating a passage and racing against another crew.

Bjorn Janson together with King Carl XVI Gustaf, glass in hand, at the christening of Polaris, the first J Craft, her white b
Bjorn Janson together with King Carl XVI Gustaf, glass in hand, at the christening of Polaris, the first J Craft, her white bow beside him.

The Baltic has never been much impressed by varnish.

Look beneath the Torpedo's mahogany and the first substantial decision is already there: a modern composite hull made on Gotland using vacuum-infused fibreglass. The structure carries the loads, while real wood supplies the warmth, grain and character where they can be enjoyed. She has not been made into a traditional wooden boat merely to look like one.

From above: a mahogany deck with cockpit and cabin still open, trolleys of joinery alongside, a finished hull on her stand be
From above: a mahogany deck with cockpit and cabin still open, trolleys of joinery alongside, a finished hull on her stand beyond.

Each Torpedo is Type B certified, an open-sea design category covering waves of up to four metres. The islander's awareness of changing weather and the fisherman's need to get home belong alongside the certificate, with the decision to go remaining with the person at the helm.

Type B certified for the open sea: Torpedo Zens at speed in the Baltic Sea outside of Visby, Gotland.
Type B certified for the open sea: Torpedo Zens at speed in the Baltic Sea outside of Visby, Gotland.

Narrow, book-matched strips of real mahogany are laid across the deck and coamings. The veneer is worked from timber in the yard, the teak flooring is prepared there too, and the mahogany surfaces are sanded and finished by hand in repeated coats. For a craftsman with Zoltan's furniture training and a boat builder's experience of lamination, the surface and what supports it belong to the same question. The judgement lies in making the materials work together, rather than asking one material to satisfy every demand because it looks the part.

That thinking extends to the windscreen, whose first job is to shelter the people in the cockpit from wind and spray as the bow meets the waves, not merely to complete a handsome profile. J Craft develops the structural steel for open-sea strength and fatigue resistance, casting the wraparound stainless-steel frame to order in-house and polishing it by hand, while the glass comes from the same specialists who supply Swedish naval vessels and is engineered for impact resistance offshore. For these island boatbuilders, the sea has been both workplace and racecourse, and military service has added its own discipline to the judgement they bring to the workshop: equipment must be equal to the job, however beautifully it is finished. The cleats and other stainless fittings are made in-house too, where their strength, fit and finish remain one responsibility. A polished cleat still has a line to hold when the wind rises and the boat pulls hard against her moorings.

Cast to order in-house and polished by hand: the wraparound stainless windscreen frame, brought to a shine with a cloth.
Cast to order in-house and polished by hand: the wraparound stainless windscreen frame, brought to a shine with a cloth.

Quiet competence

The sportsman brings another question: how does the boat respond? Johan and Zoltan's years in a racing crew give that question a lived meaning, while the Torpedo's Volvo Penta IPS propulsion and joystick control put modern manoeuvring beneath her familiar lines. An owner need not be a racing sailor to appreciate being able to place her carefully in a confined harbour.

Zoltan Antunovic after a long day of test driving, headlamp still on, the harbour piers fading into dusk behind him.
Zoltan Antunovic after a long day of test driving, headlamp still on, the harbour piers fading into dusk behind him.

Behind the analogue silhouette is a digital backbone. Garmin and Volvo Penta's integrated Glass Cockpit can bring navigation, engine information and other onboard systems together across helm displays, a retractable display and compatible portable devices. The information need not occupy every handsome surface in order to be available when wanted.

Depending on the chosen specification, radar tracking can help the skipper follow nearby traffic, a FLIR thermal camera can help with awareness after dark, and dynamic positioning can help hold the boat in place while waiting for a berth. Each answers a recognisable situation rather than adding another reason to look at a screen.

Military experience brings a useful discipline to this conversation: consider how equipment works together and what the person using it needs when a task becomes demanding. The naval officer's concern with navigation, the soldier's attention to dependable equipment and the sportsman's interest in response meet here, in technology that supports the person at the helm without taking over the character of the boat.

For the owner, the classic appearance need not come with yesterday's compromises.

Made together

J Craft has 25 Torpedoes built or in build, with a core team of 10 masterbuilders bringing in excess of 300 years of combined experience. Johan and Zoltan give that collective figure a human scale, and their breadth of experience helps explain why adding another pair of hands is not simply a matter of filling a vacancy.

Polaris, the first J Craft, built for King Carl XVI Gustaf: bare deck planking, an open hatch, and a windscreen frame not yet
Polaris, the first J Craft, built for King Carl XVI Gustaf: bare deck planking, an open hatch, and a windscreen frame not yet polished.
Zoltan Antunovic today, clamps set along a curved frame: the furniture maker's sense of fit, still at work.
Zoltan Antunovic today, clamps set along a curved frame: the furniture maker's sense of fit, still at work.

The island's working and seafaring culture runs through the yard, although the particular lives belong to the people who have lived them, and no two accounts will be quite the same. That matters to an owner because a commission draws on more than one person's judgement, while remaining small enough for the people doing the work to be known.

Spray over dark rock on the Gotland shore: the sea that the islander and the fisherman learn to read.
Spray over dark rock on the Gotland shore: the sea that the islander and the fisherman learn to read.
Far from Visby: Torpedoes moored stern-to in St Tropez, a midnight blue hull nearest.
Far from Visby: Torpedoes moored stern-to in St Tropez, a midnight blue hull nearest.
King Carl XVI Gustaf and Johan Hallén in St Tropez: J Craft's first customer beside the man who helped build his Polaris.
King Carl XVI Gustaf and Johan Hallén in St Tropez: J Craft's first customer beside the man who helped build his Polaris.

Each Torpedo is built from the keel up at our yard in Visby, with hull building, joinery, upholstery and metalwork carried out there. Much of what will become the boat is made by the team, not merely received as finished work awaiting assembly, so the people shaping one part can understand what their colleagues need from it.

J Craft's shipyard in Visby, where every Torpedo is built from the keel up: boats on their stands, a seascape filling the end
J Craft's shipyard in Visby, where every Torpedo is built from the keel up: boats on their stands, a seascape filling the end wall.

An estimated 90%-plus of each Torpedo by value-add is Swedish-made and sourced. The nearby suppliers we know are an extension of the team, so a question about a material, a finish or a fitting can be discussed with the people responsible for it.

A cleat still rough from its casting, waiting to be finished for a Torpedo's deck.
A cleat still rough from its casting, waiting to be finished for a Torpedo's deck.

This is another consequence of the islander's attachment to place. The yard makes the windscreen frame, the glass supplier provides the glazing, and the people responsible can discuss how the two fit together. The boat builder can consider the parts as a whole, and the owner can come and meet the people making those judgements. Origin becomes a relationship rather than a line on a document.

One owner's boat

Today, J Craft chooses to build two to three boats a year. The labour in each Torpedo falls within a range of 8,000 to 10,000 man-hours, depending on specification. The conversations take as long as the owner needs to establish exactly what they want from their boat.

The argument in What 9,300 Hours Means: Craftsmanship as Investment is that the hours are a deliberate investment in the owner's life, not that taking a long time proves value. Gotland explains something about the judgement being invested during those hours.

Johan Hallén after the very first Torpedo sea trial, seated on her unvarnished deck with the sea behind him.
Johan Hallén after the very first Torpedo sea trial, seated on her unvarnished deck with the sea behind him.
Johan Hallén, microphone in hand, at the launch of the Torpedo in St Tropez, 2009.
Johan Hallén, microphone in hand, at the launch of the Torpedo in St Tropez, 2009.

An owner may want a family day boat, a chase boat to accompany a larger yacht, a tender for trips ashore, or a Torpedo that serves more than one of those roles. We ask where she will be kept, who will use her and what they want to do aboard. Cockpit and cabin layouts can be shaped around that use, with storage, charging provision or a garage for water toys considered as parts of the arrangement rather than a collection of extras.

Fishing and racing make the whereabouts of equipment more than a question of tidiness, just as furniture making makes a cabin more than an outline on a drawing. Those perspectives are useful when an owner and the yard discuss what needs to be carried, what should be within reach and how people will move through the boat. The craftsman's feel for fit and the boat builder's understanding of the whole allow an owner's wish to become something that works aboard.

The islander's view of a boating season has room for cooler days, too. The standard bimini provides shade, while an optional sprayhood or full Cabrio enclosure offers protection from wind and rain, the full enclosure making the cockpit a usable 'second cabin'. Optional cabin heating brings warmth below for use beyond high summer. The choice of radar, night vision or dynamic positioning likewise begins with the intended use, not an ambition to fit everything available.

There is still room for a colour chosen simply because somebody loves it, a texture that feels right or a piece of wood with particularly beautiful grain. Experience does not narrow the owner's freedom. It gives personal choices a sound boat to become part of.

Worth keeping

The same judgement has consequences beyond the handover. A durable composite structure, real wood that can be refinished and systems that can be updated allow the Torpedo to be renewed as surfaces age and lives change. The existing stainless fittings can be polished during rejuvenation, keeping the craftsman's original work in service rather than treating a fitting as something to discard when its shine fades.

The original making is the large commitment. Periodic rejuvenation preserves that investment in structure and workmanship, allowing the owner to retain the finishes and arrangements they still love, restore what needs attention and upgrade systems where they want something new. The work serves the next years of life aboard the same boat.

Johan Hallén, who has built every J Craft since 1999, reaches between the grab handles of a varnished Torpedo to work on her
Johan Hallén, who has built every J Craft since 1999, reaches between the grab handles of a varnished Torpedo to work on her aft hatch.

Making each Torpedo from the keel up in Visby also means taking responsibility for how she is made. Renewable energy is used in the factory and in each build. The yard uses wood-chip heating and heat recovery, and every hull is cured using 100% renewable electricity. Building here and sourcing predominantly in Sweden also keep the supply chain closely connected to the people doing the work.

Return to the hand sanding the mahogany. The experience of fishing and racing, naval and army service, the furniture maker's feel for a joint, the boat builder's understanding of structure and the islander's decision to stay all meet in the work that shapes an owner's commission, from the hull beneath the wood to the equipment at the helm and the cabin below.

That is the Viking heart within the modern materials and digital backbone: a boat made by people for whom the sea is part of life, and whose judgement remains aboard. Gotland matters because that judgement is still being applied, one owner's boat at a time.

Beautiful, functional, and above all capable.

Not made in Sweden. Made of Sweden.

Made of Sweden: Torpedo Natalia under way at sunset, mahogany deck and Hermès upholstery, the Swedish flag at her stern.
Made of Sweden: Torpedo Natalia under way at sunset, mahogany deck and Hermès upholstery, the Swedish flag at her stern.